UpTone Audio UltraCap LPS-1
Listed · 294 Views
2 Watchers
This listing has ended.
Listings Similar to UpTone Audio
Time Left: Listing Sold
This listing has ended.
Condition | |
Payment methods | |
Ships from | Mohave Valley, AZ, 86440 |
Ships to | United States |
Package dimensions | unspecified |
Shipping carrier | UPS |
Shipping cost | $15.00 |
Average | Research Pricing |
Amended on
I am the original owner. I have two of these for sale. One of them was used for my MIcro Rendu and the other for my Uptone Audio iso Regen. If you take both I'll sell them for $150 each.
Description from manufacturer:
The world's first bank-switching, microprocessor-controller, ultracapacitor-based, ultra-low-noise external linear power supply has arrived!
In development for more than a year, and with 262 parts on the double-sided, 4-layer circuit board, this tour de force of engineering challenges traditional notions about what is important in power supply design.
Use of the UltraCap™ LPS-1 in a quality music reproduction system will yield surprisingly audible improvements, and we invite comparisons to any other low voltage linear power supply.
The LPS-1 is a single output, 1-amp linear power supply intended for powering a wide range of audio and computer devices. Examples include: UpTone's own USB REGEN, the Sonore MicroRendu, small DACs and headphone amps, USB>S/PDIF converters, specialty computer USB cards, SSDs, fibre media converters, PS Audio LANRover, SqueezeBox Touch, etc.
A switch on the back of the LPS-1 allows for setting of the output voltage to 3.3V, 5V, or 7 volts. The input and output jacks of the LPS-1 are standard 5.5mm x 2.1mm size DC barrel connectors.
The dimensions of the LPS-1 are: 110mm (4.33 inches) wide x 112mm (4.41 inches) deep x 30mm (1.18 inches) tall; Add 6.5mm (0.26 inches) for included rubber feet.
Included with the LPS-1:
A 70cm, 16awg, DC cable with 5.5mm x 2.1mm plugs at both ends (correct for a REGEN, MicroRendu, and many other popular devices that use that size).
A Mean Well SMPS world-voltage-compatible tabletop SMPS for "energizing" the UltraCap™ LPS-1, along with a 45cm AC power cable (standard IEC plug one end, USA wall plug at the other—international buyers can cut and put a local plug on or just use any standard power cord).
An LED at the back of the LPS-1 changes color (red/amber/green) based on the status of the supply. The programming of its 4096 logic-element FPGA controls and protects every aspect of its operation to assure safe and reliable performance.
There has never been a power supply like this before! The UltraCap LPS-1 will elevate the performance of whatever component you power with it.
I am the original owner. I have two of these for sale. One of them was used for my MIcro Rendu, and the other for my Uptone Audio iso Regen.
Description from manufacturer:
The world's first bank-switching, microprocessor-controller, ultracapacitor-based, ultra-low-noise external linear power supply has arrived!
In development for more than a year, and with 262 parts on the double-sided, 4-layer circuit board, this tour de force of engineering challenges traditional notions about what is important in power supply design.
Use of the UltraCap™ LPS-1 in a quality music reproduction system will yield surprisingly audible improvements, and we invite comparisons to any other low voltage linear power supply.
The LPS-1 is a single output, 1-amp linear power supply intended for powering a wide range of audio and computer devices. Examples include: UpTone's own USB REGEN, the Sonore MicroRendu, small DACs and headphone amps, USB>S/PDIF converters, specialty computer USB cards, SSDs, fibre media converters, PS Audio LANRover, SqueezeBox Touch, etc.
A switch on the back of the LPS-1 allows for setting of the output voltage to 3.3V, 5V, or 7 volts. The input and output jacks of the LPS-1 are standard 5.5mm x 2.1mm size DC barrel connectors.
The dimensions of the LPS-1 are: 110mm (4.33 inches) wide x 112mm (4.41 inches) deep x 30mm (1.18 inches) tall; Add 6.5mm (0.26 inches) for included rubber feet.
Included with the LPS-1:
A 70cm, 16awg, DC cable with 5.5mm x 2.1mm plugs at both ends (correct for a REGEN, MicroRendu, and many other popular devices that use that size).
A Mean Well SMPS world-voltage-compatible tabletop SMPS for "energizing" the UltraCap™ LPS-1, along with a 45cm AC power cable (standard IEC plug one end, USA wall plug at the other—international buyers can cut and put a local plug on or just use any standard power cord).
An LED at the back of the LPS-1 changes color (red/amber/green) based on the status of the supply. The programming of its 4096 logic-element FPGA controls and protects every aspect of its operation to assure safe and reliable performance.
There has never been a power supply like this before! The UltraCap LPS-1 will elevate the performance of whatever component you power with it.
No questions have been asked about this item.
Ask the seller a public question
You must log in to ask a question.
Return Policy
Return Window
Returns are not accepted on this item.