Description

This is my first serious setup. I am expecting more bass authority and open to any suggestion. Happy Listening. Otto
Read more...

Components Toggle details

    • Balanced Audio VK-D5
    with Amperex 7308 Tubes
    • Aurio MIB
    • Silver Audio Appassionata
    • Counterpoint SA-11
    with Tung-Sol 6SN7-GTB Tubes
    • Counterpoint (Alta Vista Audio) NP-100 monoblock
    300 w @ 8 ohm per channel
    • Ensemble Megaflux
    • Thiel Audio CS-3.6
    pair, 200 lbs
    • Silver Audio Power Burst
    • Chang Lightspeed CLS-9600 ISO

Comments 5

What is your room like? Give us its dimensions and where you currently place the Thiels.

Some rooms and the speaker placement within them will help or hinder bass.

kalan

While you're at it, you really should consider 3 dedicated audio circuits. With your high-powered amplifier on a dedicated 20 amp circuit your dynamic headroom should just blossom even at low volumes. Then you should have a dedicated 15 amp circuit for your digital source (because of the digital noise induced back into the line) and another for your preamp. Even a low-powered preamp sharing your amplifier's circuit draws just enough to strip away the dynamics. If your electrician can do one, he can do three. He'll just need to double up on a few of the circuits in the service panel. Oh, and if you choose to do this, you should have him connect all audio circuit grounds to the same common isolated ground if possible.

stehno

While you're at it, you really should consider 3 dedicated audio circuits. With your high-powered amplifier on a dedicated 20 amp circuit your dynamic headroom should just blossom even at low volumes. Then you should have a dedicated 15 amp circuit for your digital source (because of the digital noise induced back into the line) and another for your preamp. Even a low-powered preamp sharing your amplifier's circuit draws just enough to strip away the dynamics. If your electrician can do one, he can do three. He'll just need to double up on a few of the circuits in the service panel. Oh, and if you choose to do this, you should have him connect all audio circuit grounds to the same common isolated ground if possible.

stehno

Owner
Joel, Thanks for your suggestion. It is an old house but I will check with my contractor to see the complexity to install the dedicated circuit. By the way, you have an excellent CD player. Happy Listening. Otto

yu11375

Otto, Do you have a dedicated circuit for your system? I recently installed two 20 amp dedicated circuits with high-end Hubbell outlets. Major improvement, particularly in the bass. (My system Linn Ikemi CD, Plinius 8150 SS integrated, B&W Matrix 803s). Not more bass, but cleaner and tighter (just what I wanted). I also added a new Quadraspire rack at the same time. Don't know how much improvement came from each upgrade, but the system it just what the doctor ordered! Happy listening. Joel

joeldoss

Showing all 5 posts