Hi Efficiency system with low power SET and Push-Pull amps
I also have a bunch of EL84 PP amps ( Scott 222C/Fisher SA-16/Heathkit SA-2/Pilot SA-240/Pilot SM245/Pilot SA-232/Heathkit AA-151) and 7591 amps ( Heathkit aa-100/Eico ST-40) and EL84 SET and Sun Audio 2A3
and Dynaco ST-70 ran on this system as well.
After playing around with over hundreds of different cables, I then decided to make my own which works out just great.
The commercial cables like Stealth Audio and NBS were my best experience.
As far as power cord goes, the DIY cables can be really great.
CD-67 SE mk II modified with different opamp and kwok-clock. disc chasis damping and chip shielding. Noticeable improvement to bring it to the next level.
Willison circuit based without feedback loop Output transformer: from Vintage Pilot SA-232 Output tube: Western Electric 421A Driver tube: Vintage Brimar CV4024 12AT7WA Phase splitter tube: Vintage 50s RCA long black plate 12AU7
DIY EL84 autoformer Push pull tube amp
This is based on Jack Elliano's design with 6J6 drivers Output transformer: from vintage Heathkit SA-2 autoformer transformer: Eltra-Print PV-2AN driver tube: Sylvania 6101