Blythe Spirit

by cjfrbw on Ever Evolving

Description

Home Theatre combined with two/multichannel Audio System, Ribbon speakers with active crossover for two channel stereo, seven ribbon speakers in all with two subwoofers, SACD multichannel, Movie Multichannel, and separate vinyl based analog setup
Read more...

Components Toggle details

    • SME Model 30/2
    SME 30/2 with Da Vinci Grandezza 10" arm
    • Da Vinci Grandezza Reference
    10 inch arm, took some creative manipulation to get it mounted with proper geometry on SME 30, but finally worked, nice arm.
    • Clearaudio Harmony MG
    Harmony Mg MC Cartridge, nice
    • Allnic Verito Z
    MC cartridge
    • Benz Micro MC-3 Cartridge
    MC-3 Last one made as a tribute for a trade show a few years ago, was a top end MC catridge in the 90's
    • Allnic HT 2500
    Nuvistor Head Amplifier for MC cartridge
    • Allnic H-3000 Phono Preamp
    all transformer coupled, six transformers per channel,
    • Allnic L 5000
    DHT version of L 4000
    • Accuphase F 25
    Four Way Active Crossover set at 70 Hz, 300 Hz and 3500 Hz
    • Analysis Audio Epsilon
    Two Way Ribbon, added Aurum Cantus 2Gsi supertweeters with custom foils.
    • Yamaha RX Z9
    Home Theatre Receivier with SACD, DVDA, Redbook multichannel/two channel decoder and Surround/Ambience Recovery Processer
    • Wavac 572
    I have two of these, one for the MRT and one for the bass panels of the Analysis Epsilon, stuff of dreams, panels and SET with active Xover.
    • Wavac MD 811
    Integrated amp based on 811b tube
    Used with active crossover for center channel and multi channel sources
    • Agape 300b
    300b prototype amp, Tuck Thean, used for rear surrounds, modified Laurel 300b used for front surrounds
    • John Hogan 6sn7/26/300b
    300b used for surrounds and sometimes all by itself, great sounding amp with old Webster organ trannies.
    • Wavelength Jr.
    7 watt single ended pentode for tweeter array above 3500 Hz, intense, sweet, betters about ten other amps both tube and solid state in this slot
    • Monster oxygen free copper
    Not my religion, except for pure silver cable for Phono/Tonearm
    • Meridian 518
    Digital Preamplifier, noise shaping, dithering, upsampling, jitter removal, for Redbook
    • Pioneer 47 Ai
    DVD player, multichannel SACD and DVDA hi rez sources output through firewire i-link to Yamaha RX Z9
    • Powervar 1200, Power Wedge Powervar, Power Wedge
    Line Conditioners, two powervars and one power wedge.
    • Apogee Acoustics Centaur Minor
    used for multchannel center and rear surrounds
    • Apogee Acoustics Cassiopeia 6
    Pair used for front surround above main pair
    • Velodyne ULD-15 mkII
    Rebuilt Classic Sub, great sounding
    • Klipsch Generic
    Speaker only powered by Yamaha pro vintage amp, old with no version, two eight inch paper cone speakers that pack a surprising wollop

Comments 43

Showing all comments by perrew.

View all comments

Sign in to comment
Thank you very much for the invaluable info. I will start out with the stock tubes and run the cart for around 50 hours and then defiantely try the WE417a. Im happy to hear that the Allnic doesnt seem to be sensitive to cabling. Im gonna try the DNM cables which I think have a nice technology behind them.

perrew

Cjfrbw, thanks for the info. I have not heard it myself yet, but from other people the Allnic phono/cart combo is supposed to be very good. I was at first going to try the Strain Gauge but decided to go for the Allnic. Can you find WE417a on ebay or similar? What ICs do you use to cnnect the Allnic to pre, and hows the sensitivity to Power cords?

perrew

Hi,

I see you have a Allnic 1500 phono. I have just ordered one myself and wonder if you can say something about swapping the tubes? Also have you tried it with the Allnic cart?

perrew

  • 50K
  • 43
  •  0
Latest forum discussions
© 2024 Audiogon.com