Description

Complete change in direction from my Vandy/McCormack/BAT system. More emotional than the Berning. VAC pre-amp has added better micro-dynamics, instrumental definition, three-dimensionality. Teres table w/Schroder arm and ZYX cart now pretty much all set. The music just flows.
Read more...

Components Toggle details

    • Sound Science Music Vault Emerald
    Dedicated music server, running JR River, serving files wirelessly to Modwright Transporter
    • Logitech Transporter
    Full Modwright upgrades, running Psvane CV-181 tubes.
    • Exemplar 3910
    Modified Denon tube output universal player with Siltech
    • Teres 255
    Unsuspended, monkeywood plinth, outboard dc motor w/diy mylar drive belt.
    • Schroder Model 2
    w/Pertinex arm tube.
    • ZYX Airy 2
    w/silver base
    • Doshi Audio Alaap
    Full function pre-amp w dual TVCs. Updated 2013.
    • D.I.Y Supply Lady Day+
    Upgraded LadyDay+ 300b monoblocks. AN silver caps, KR 300bs.
    • Valve Amplification Company REN-3030 mkIII
    Push pull w 2, 300bs per side, running Psvane BT 300bs and CV-181s. Great amp. I imagine I will always hold onto this baby. Probably going to set up a second system in my basement for now.
    • DIY Open baffle
    Feastrex 5" w whizzers and phase plugs, run full range, driven by LadyDAy+ monoblocks, w 2, 12" subs on each baffle driven by 500w plate amps.
    • Synergistic Research Master Coupler
    5'
    • Jade Audio Vermeil
    Single ended w Furutech RCAs
    • Salamander Archetype
    Nothing fancy here. Using BDR shelves or pucks under most of the equipment.

Comments 36

Showing all comments by swampwalker.

View all comments

Owner
Brightvalves- PM me if you still need the manual.

swampwalker

Owner
System edited: After reading a comment from Jmcgrogan2, I realized that I had not updated by system profile in several years. I'm very happy with the way rig now this sounds; I don't hear any deficiencies. Doesn't mean I'd not consider ways to make it better ;-) I focus on timber, tonality, and emotional impact. This rig is in our living room, which has to accommodate furniture, TVs, etc, so soundstaging and imaging cannot be my primary focus. I don't think this is too romantic sounding, but if I had to err it would be in that direction rather than toward detail and speed. My only complaint right now is that with monoblocks, power supplies for the field coils, and plate amps, and headphone amp, I need 12 outlets (6 duplexes) to power the bloody thing. And that's not counting the server and router which are in another room. God bless my long-suffering wife!

swampwalker

Owner
Hi Necrosuit- Sorry for not having checked my system page sooner. Maybe next year.

Hi Lateguestsnomore- The link directs me an ebay page is expired, but I assume that they suggested a VOM aka multimeter. I got one @ Radio Shack that looks like this http://rsk.imageg.net/graphics/product_images/pRS1-7922775t98.jpg. After looking at the amp, however, I don't see obvious test probe points. I will look into it further and try to find out. If you want to check back, feel free to email be through the audiogon system or at msklein52atcomcastdotnet.

swampwalker

Owner
Gentlemen- Pix coming soon but there has been a lot of gear moving in and out as you can see. I have a second sub coming this week and will post results. Its been a v busy year in my personal life; when I have some time I have been listening. I can report that I have gone from the Exemplar 3910 to an APL 3910 which I can report as an improvement. Brings back a little of the speed and clarity that I liked with the Atma M-60s but I can have the harmonic richness and emotional impact of the Joule at the same time. Once I get the second sub installed I will post some pix.

swampwalker

Owner
System edited: Almost finished with my analog set up. Perhaps adding a VTA adjustment to the Teres and I expect that will be it. Also using the ZYX Active head amp or pre-pre which makes a very nice improvement.

swampwalker

Owner
System edited: Recent changes- new TT, cabling, have pretty much settled on the Joule amp with the Jade Audio cables.

swampwalker

Owner
Still evolving- cables have moved up to Cardas Golden Ref. Better but perhaps a bit too smoothed off or rounded. I am trying the new Jade Audio Vermeil cables and they seem to be very good. A bit more bite if you will. Hard to pull the trigger on selling the Joule but right now that's where I am headed. Have added a Teres 255 to replace the SOTA; big improvement there.

swampwalker

Owner
System edited: Have now gotten balanced cables (Au-24) for the M-60s and they DO make a big difference. Liking these very much. Will mull this over and then sell the "looser" btwn these and the Joule.

swampwalker

Owner
Spencer- Unfortunately, I sold the Berning w/o doing any rolling on the small tubes. I found a good deal on a VZN-80, loved it, and sold the Berning. I am very happy with the VAC-Joule-Merlin synergy. The microdynamics and detail are terrific and I find myself turning the volume down, which is unusual. Nothing sterile or hi-fi at all about this system. Room size is 14 x 23 x 8.5 and the 80 is plenty. If I every renovate my attic into a listening room, I will add another 80 and convert them to monos, because it is 32 x 18!!! Remember that the Joule chassis is quite large, maybe 24" x 14" x 10" high, plus the variac.

swampwalker

Owner
System edited: Forgot to add the amp. Obviously a major element. Matches great with the Merlins- I preferred it to the Berning, but some who are quite knowledgable say that the use of Power conditioning and perhaps poor matching of NOS input and driver tubes could have made the Berning into more of what I wanted.

swampwalker

Owner
System edited: I've now gone through two pre-amps and 2 amps. The VAC was a huge improvement in the line stage, waiting for the new armboard to return from SOTA to try out the phono stage.

swampwalker

Owner
I've got the cryo'd output tubes and NOS AT and AU7s. Can't remember which. When I try it again, I'll open er up and post.

swampwalker

Owner
Hi Artg- I am now leaning very heavily toward the Joule, although its unusually large chassis and high heat output are definately a disadvantage compared to the Berning. The Atmas put out even more heat and you have 2 chassis, but I liked both of them better than the Berning (like trying to decide between Chocolate chip, chocolate chunk and chocolate swirl). I did finally get the right tube combination for my Supratek (Brown base 5692s and a GZ32 rectifier) and the imaging and soundstaging really improved. I shoult put the Berning back in now and give it another whirl. NOte: the berning does NOT have the internal wire upgrade.

swampwalker

Owner
Thanks, Keith- I am having fun and am now trying a pair of Atma-sphere M-60 2.3s. I will swap them in & out with the Berning and report back.

swampwalker

Owner
I had a pair of the 2Ws for a while and liked them very much. They seemed to work especially well with a pair of single driver horns that quit at about 80 hz. The WAF of the Merlins w/o subs is way better than the 3Asigs w/2 subs, and my room seems visually much bigger as well. 'Course, if Bobby ever gets the Merlin sub on the market, I suppose I will give it a try.

swampwalker

Owner
System edited: Went to an all tube system and large 3 ways w/stereo subs to 2 ways w/o a sub. Sound is very clear and recording brightness is audible. No complaints so far.

swampwalker

Owner
System edited: Bi-amping w/0.5s is a distinct step up from a single 1.0; I'm also going to try a single Llano Trinity 300 w/NOS Telefunken 12AX7s.

swampwalker