Description

I was looking for a small, inexpensive audio rack for my system at work. The system is comprised of:

Proton 930 Receiver

Micromega Leader CD player

NHT SuperOne speakers

Goertz M1 1 Meter Micropurl interconnect

QED Silver Anniversary flat silver speaker cables

Couldn't find anything that met my criteria for stability, relative size required for a system that sits on my desk, appearence, and cost. This DIY project took bits and pieces of a weekend. The rack itself is 19" wide by 14" deep by 19" high. Cost was around $100:

Three butcher block shelves from Ikea @ $20 each

(2) six foot 5/8" #11 threaded rods at $5 each. Cut in half to make a 18" high rack.

24 5/8" nuts @ .30 each

20 5/8" washers @ .20 each

Three "tip toes "

One can of Tremclad Black HighGloss Spray paint @ $3

One can of oil-based pimer @ $7

One Can of Varathane #95 High Gloss paint ($9)
Read more...

Components Toggle details

    • DIY Butcherblock
    I bought three 1
    • DIY Primed
    Once the rack was assembled and the shelves properly spaced and level, I primed the wood with an oil-based primer
    • DIY Hardware Painted
    I spraypainted two coats of Tremclad Black Gloss on the threaded rods, nuts, washers, and the three Audiopoints affixed to the underside of the rack
    • DIY Finished Two coats of Paint
    I finished the project by painting the top, bottom, and sides of each shelf with two coats of Varathane #95 Black Gloss paint.

Comments 15

Showing all comments by tpsonic.

View all comments

Jamestown Distributors sell threaded rod up to 1" and the necessary hardware {1-800-423-0030}.Instead of PVC,Home Depot sells a 1.25"{I.D.}{part #143-200}brass tubing to hide the threaded rod{4'/$40}.I used #7 lead shot to load the stand-no need to caulk.I understand that Starr Sound {OH.} also sells material to mass load.

tpsonic