The first photo is of my current system configuration, QRD17 diffusers, with the Lenehan Audio ML2 stand mount speakers with springs between them and the stands. There's also springs on the sub, the linear power supply and under the amplifier atop the white granite slab. Speaker wires and interconnects are all wide copper foil. Fanless 8 watt commercial grade fanless PC > Geiseler GroB DAC > Datasat RA2400 (2 x 400w) > Lenehan Audio Ultimate ML2 stand mount speakers.
Duelund cast VSF capacitors, (Duelund silver oil bypass caps) Shunting caps: Jenson Superior Z-cap (Duelund silver oil bypass caps) Duelund resistors, Ribbontek internal wiring, 4mm steel plate lining the top, baffle and side walls of enclousure. Cardas solder, on all point to point connections. Rear tuning bay for final measurements and calibration. Bybee bullets on inputs of drivers
Lenehan Audio ML1 Reference
Duelund VSF capacitor, Duelund silver oil bypass caps on all three caps (shunting as well), Used two Jensen Jenson Superior Z-caps to get the correct value required Hand wound air cored inductors, Duelund cast resistors, Ribbontek internal wiring, 4mm steel plate on tops, and side walls (no room or need on the thick baffle) Pure copper spade terminals Pure copper driver mounting screws (correctly torqued)
Datasat RA-2400
400W / channel stereo fully balanced
Lenehan Audio RibbonTec Balanced Interconnects
Ribbon copper, copper pin XLR connectors
Streacom, ASRock, Samsung SSD Custom built music server
Streacom case, ASRock commerical grade integrated 2Ghz 4 core Intel CPU fanless motherboard. Ripjaws laptop RAM. Completely fanless music server with external linear power supply.
